记一次ssr后端手动对接ssrpanel

首先说下环境

机器是vultr的日本机器,配置为1H 1024MB memory 系统 centos 7 .没安装任何环境。对接的是胖虎的面板。


话不多说,马上开工!

首先安装下wget,一会要用到!

yum install -y wget

然后我们采用一键部署脚本,因为后面要安装一系列库,比较麻烦!

wget -N --no-check-certificate https://raw.githubusercontent.com/maxzh0916/Shadowsowcks1Click/master/Shadowsowcks1Click.sh;chmod +x Shadowsowcks1Click.sh;./Shadowsowcks1Click.sh

然后慢慢让脚本跑一会!


然后会出现中文提示,按照提示部署即可。

需要注意的:运行完之后如果不能正常连接,请进入目录输入python server.sh查看运行情况


附录:配置单端口

进入ssr配置目录

编辑user-config.json

以下给个范例,密码和端口等参数自行修改!

{
    "server": "0.0.0.0",
    "server_ipv6": "::",
    "server_port": 8388,
    "local_address": "127.0.0.1",
    "local_port": 1080,

    "password": "m",
    "method": "aes-128-ctr",
    "protocol": "auth_sha1_v4_compatible",
    "protocol_param": "",
    "obfs": "tls1.2_ticket_auth_compatible",
    "obfs_param": "",
    "speed_limit_per_con": 0,
    "speed_limit_per_user": 0,

"additional_ports" : {
    "80": {
        "passwd": "pass",
        "method": "aes-128-ctr",
        "protocol": "auth_aes128_md5",
        "protocol_param": "#",
        "obfs": "tls1.2_ticket_auth_compatible",
        "obfs_param": ""
    },
    "443": {
        "passwd": "pass",
        "method": "aes-128-ctr",
        "protocol": "auth_aes128_md5",
        "protocol_param": "#",
        "obfs": "tls1.2_ticket_auth_compatible",
        "obfs_param": ""
    }
},

    "additional_ports_only" : false, // only works under multi-user mode
    "timeout": 120,
    "udp_timeout": 60,
    "dns_ipv6": false,
    "connect_verbose_info": 1,
    "redirect": "",
    "fast_open": false
}

需要注意的是:一定要把服务器时间改为CST!

下面给一个方法

vi /etc/sysconfig/clock

把值改为

Asia/Shanghai

不要问我为什么不是北京!

然后

date -s 

然后date 一下,看看是不是CST!


lz原创!

Like

Leave a Reply

Your Email address will not be published. The required items are marked with *